Diamond Pistons for LSJ

10.0:1 compression and .10 over these Diamond Forged pistons for the supercharged 2.0L ecotec motor are coated both top and sides, brand new and come with rings and pins. 1 set in stock and available for immediate shipment (Brand New)

$500.00 Shipped

ATI 245mm Street/Strip Heavy Duty Torque Converters

These are brand new overstocks.

ATI Street/Strip Converters weigh several pounds less than the factory L67/L32 torque converters - and this is mass rotating AT ENGINE SPEED. A lighter torque converter means much longer transmission life and significantly faster engine revving capabilities. These top of the line converters are made with 4340 alloy splines that are MIG welded for strength and durability. 4340 alloy splines are approximately twice as strong as other manufacturers and MIG welds that are virtually fail proof compared to the lazar welds from GM that most rebuilders retain for high performance use.

(4) TCS-3500 available
(2) TCS-3750 available
(4) TCS-4000 available

$325.00 Shipped

Authentic GM Ecotec 2.0 supercharged LSJ Head Gasket

Never Used.

$25.00 Shipped.

INTENSE Stage 4 CNC Heads

These INTENSE Stage 4 Heads were made for a customer who never picked them up. They are brand new, never installed and painted aluminum. These are normally $2,200.

Brand New

$1,900

Transgo 4L60E Reprogramming Kit

TransGo's Performance shift kits give you the hard-launching, tire-blazing shifts you want, after just a few hours' work with basic hand tools.

Two available. (Brand New)

$50.00 Shipped.

INTENSE™ Forged Output Shaft

The INTENSE™ Forged Output Shaft is a custom made unit of 1541 alloy, modified with increased nickel and manganese content (to provide flexibility), then induction heat-treated (a special process that optimizes torsional strength without causing brittleness). The shaft diameter is increased .050" or 5.3% (from .944" to .994") for a cross-sectional area increase of 10.8% (.223 to .247 square inches).

4 Available (Used)

$75.00 Shipped.

Magnuson MP112 Pulley 3.4

Excellent shape. Like New.

$20.00 Shipped.

3800 AC Delete Kit

The INTENSE™ Air Conditioning Delete Kit allows you to remove the air conditioning compressor on your 3800 Series II/III for nearly 15lbs of weight savings! Our bracket is extremely light weight, at only 1.3lbs, and bolts on directly in place of your stock air conditioning compressor. Our pulley is made of a lightweight composite (for extremely low rotating mass), the same size as stock, and designed for use with the stock-sized accessory belt.

8 Available (Brand New)

$65.00

INTENSE™ Race Only Front Brake Kit

One of the most effective ways to make immediate gains in the quarter mile is through weight reduction. If you're serious about quarter mile racing, and want that little extra edge on the competition, this may be the mod for you.

1 avalable (Brand new)

$250.00

Used Siemens 60lb Fuel Injectors

Low mileage used for testing these 60lb injectors are in perfect working order.

4 Available

$30

INTENSE LSJ Polyurethane Control Arm Bushing (Pair)

The stock GM ctrl arm bushings use flabby rubber, with air pockets, where installation must be "keyed" in the proper direction. These poly control arm bushings remove this easily mistaken "keyed" approach while virtually eliminating wheel hop. This allows you to launch much harder. These use 6061 aluminum outer body casings and a nickel-plated steel inner-collar for added strength.

While supplies last save 50%!

$99.99

INTENSE LSJ Polyurethane Transaxle Mounts (Pair)

These Polyurethane inserts replace the stock rubber bushings found in the front and rear transaxle mounts on the Cobalt SS and ION Redline. Made of extremely high quality material our polyurethane inserts will eliminate your wheel hop issues while maintaining a nice firm and comfortable ride.

While supplies last save 50%

$39.99

2000 Bonneville Race Chassis

This is the chassis of our BADSSEi which has the distinction of being the fastest 3800 powered FWD Bonneville on the planet. It has a rollcage installed and most dash and interior pieces. It does not have a drivetrain, suspension or wheels. The body is in immaculate shape. This would make a great track only car. Pictures available on request.

$2300

Mitsubishi TD06-20G Turbochargers

We have the two turbochargers from the APS kit on our flagship G8 up for sale. They're Mitsubishi TD06-20Gs, and are rated for up to 400 WHP each. We made 723 RWHP with them on pump gas @ 11 psi of boost. They are in good condition and have 11,000 miles on them. These would be an excellent starting point for someone interested in fabricating their own kit.

2 available (used 11,000 miles, great shape)

$500

Various 6-Rib Belts

672K6 (1)
4060650 (4)
672 K6 (1)
4060685 (2)
4060690 (4)
4060695 (1)
4060705 (2)

$4 each, $11 for 3, $13 for 4
w/ any purchase

Various 6-Rib Belts

710 K6 (2)
4060715 (3)
4060725 (1)
740 K6 (1)
4060745 (1)
4060750 (1)
4060960 (1)
970 K6 (1)

$4 each, $11 for 3, $13 for 4
w/ any purchase

Various 8-Rib Belts

4080645 (1)
655K8 (1)
25-080670 (1)
25-080695 (2)
25-080700 (2)
25-080708 (1)
25-080720 (4)
K080726 (2)
25-080733 (8)
25-080745 (2)

$7 each, $17 for 3, $20 for 4
w/ any purchase

GM Stage 2 Modular Pulley System

Includes GM Stage 2 Pulley and Hub, used.

$50.00 Shipped