LS6 Medium Load Valve Springs

LS6 Medium Load Valve Springs

$77.99

Part Number: GVS-LS6

Shipping Weight: 2.50 pounds

4 out of 54 out of 54 out of 54 out of 54 out of 5 3 Customer reviews
Read all reviews (or) Write a review

Package type:

Quantity:

Share with a friend

APPLICATIONS:

  • 1998-2003 Bonneville with 3800 Series II engine
  • 1998-2002 Camaro with 3800 Series II engine
  • 1998-2002 Firebird with 3800 Series II engine
  • 1998-2004 Grand Prix with 3800 Series II or Series III engine
  • 2000-2004 Impala with 3800 Series II engine
  • 1998-1999 Intrigue with 3800 Series II engine
  • 1998-2003 LeSabre with 3800 Series II engine
  • 1998-2000 Lumina with 3800 Series II engine
  • 1998-2003 Monte Carlo with 3800 Series II engine
  • 1998-1999 Oldsmobile 88 with 3800 Series II engine
  • 1998-1996 Oldsmobile 98 with 3800 Series II engine
  • 1998-2003 Park Avenue with 3800 Series II engine
  • 1998-2003 Regal with 3800 Series II engine
  • 1998-2004 other applications with 3800 Series II or Series III engine

GM manufactures these beehive shape valvesprings specifically for the LS6 engine found in the 405 horsepower Corvette Z06; however through extensive research we have found them to be a perfect match for the 3800 Series II and III engines for lower lift applications such as aftermarket rockers. These medium load springs can be used in high performance and racing applications up to .530" lift with the stock retainers. These valvesprings will fit stock L36, L26, L67, and L32 cylinder heads with no machining, and fit right into stock valvespring seats.

We recommend the LS6 Medium Load Valvesprings for engines with higher ratio rockers such as the Yella Terra Full Roller Rocker Arms. These can be used with either stock or the stronger Manley Performance valvespring retainers.

GVS-LS6 Specifications:

  • Installed load is 90 pounds at 1.800", 115 pounds at 1.720", and 300 pounds at 1.230".
  • Coil bind height is 1.160".
  • Outside diameter is 1.290"/1.060" and inside diameter is .885"/.656".
  • Maximum lift supported @ 1.720" (stock retainer install height) - .530"
  • Maximum lift supported @ 1.800" (Manley retainer install height)- .580"

IMPORTANT NOTES:

  • Sold in sets of twelve.

  • 97 and earlier Series II 3800 engines should use Crow Cams Valvsprings.

  • Average Customer Review: 5 out of 55 out of 55 out of 55 out of 55 out of 5 Based on 3 Reviews

    Write a Customer Review and share your thoughts with others.

    5 out of 55 out of 55 out of 55 out of 55 out of 5 Springs

    Devin Kump (Denver, CO) 4.4.2017

    Shipping was very fast defiantly happy with the service currently ordering a cam and John yet again. Was quick to respond I give there customer service a++

    4 out of 54 out of 54 out of 54 out of 54 out of 5 Great Springs for 1.9:1 Rockers

    Aaron Searles (Columbus, OH) 7.11.2013

    Installed these springs along with INTENSE O.R. push rods and INTENSE/HS 1.9:1 gen III rockers in my 300HP Riviera. The engine had 80k miles at the time, now has 265k miles on the same springs. I plan to install a fresh set for added insurance at higher RPM, but for daily driving this first set still feels quite strong.

    4 out of 54 out of 54 out of 54 out of 54 out of 5 Great Buy!

    Chris (Harrisburg , PA) 11.29.2012

    Paired these springs with Manley retainers, Viton valve seals, YT 1.7 rockers, aftermarket cam, AND ported/ polished heads. (Who said you can't run rockers and cam?!) All I can say is...WOW! Thanks to Intense for their great products and customer service!

    INTENSE™ and INTENSE Racing® are Trademarks of R4 Holdings, LLC. Content and Graphics © Copyright R4 Holdings, LLC 2002-2021. All Rights Reserved.
    All Third Party Names, Images and Trademarks may be the property of their respective holders.

    www.INTENSE-Racing.com
    Don't make excuses. Make horsepower.